#LG KOMPRESSOR PETCARE PLUS CANISTER FULL#

Also listen to the noise the motor makes and see if the noise changes when you put the hose back on the vacuum cleaner. Turn the machine on now as if you were using the attachment hose to clean corners or above the floor and see if the red light comes on here. Re-attach the hose and wand back on the vacuum, but just the end of the hose that goes into the vacuum cleaner, leave the wand out of the vacuum cleaner so it looks like this: If the light comes on, then this indicates that your filter is dirty (or the PCB electric board is bad if the filter is clean) and needs to be replaced. Now turn the vacuum cleaner on and check to see if the red light comes on while the hose and the wand have been removed. With the hose and the wand removed from the vacuum, it should look like this: You may do this by pressing the two tabs on the end of the hose that plugs into the vacuum cleaner: Remove the hose and wand assembly from the vacuum cleaner completely. Here's what you may do to diagnosis the machine, and try to isolate the clog to find out where it is in the vacuum. My guess is that there is probably a clog in the machine somewhere, or the filters are dirty. When it shuts off like this, it's a protection system that prevents any damage from happening to the motor when it can't breathe and starts to overheat. If your machine is actually cutting off, this indicates that your machine is definitely clogged, or something is stuck inside which is causing the motor to not get air flow, and cauing the machine to over heat. If you have changed the bag, and it's still showing this light, it means that you either have a clog in the vacuum, or your filters are dirty, which is reducing the suction and making the machine think that your bag is full.

#LG KOMPRESSOR PETCARE PLUS CANISTER FULL#

So when this light is displaying, it's says 'Bag Full or Clog' on the indicator.

Lg kompressor petcare plus canister